Automotive Stainless Steel Axis Of Cross Tooth Hole

Name: Automotive Stainless Steel Axis Of Cross Tooth Hole
Rating: 5 (99 reviews)

The use of stainless steel material turning made of a whole round and in the middle of a cross tooth hole in the centre of the shaft, used in automobiles, two need to be easy to dismantle, and can be rotated parts, according to the needs of the processing of a variety of specifications of this type of parts.

PREV：Automotive Cross Groove Axis
NEXT：Automotive Stainless Steel Axis Of The Cross-Hole

Product Description

Material	Stainless steel
Specification	On request
Surface treatment	According to the needs of the use of the scene treatment

About

Kunshan Hong Yong Sheng Precision Hardware Products Co.,Ltd.

Kunshan Hong Yongsheng Precision Hardware Products Co., Ltd. was established in September 2006, is a professional China Automotive Stainless Steel Axis Of Cross Tooth Hole manufacturer and Automotive Stainless Steel Axis Of Cross Tooth Hole supplier, the production of various types of precision parts, PEM series of standard fasteners, non-standard parts of the custom enterprise, the company's production equipment imported from Japan CNC computer numerically-controlled lathes, Taiwan CAM walking knife type high-precision automatic lathes, and various types of auxiliary equipment, precision testing equipment, totaling more than 100 units, monthly output of up to 5 million pieces. Our products are used in many fields such as electronic communications, computer monitors and chassis, automotive parts, 3C household appliances, medical equipment, pneumatic machinery, sports equipment, furniture, lighting, aerospace, military, photovoltaic, intelligent industry and so on, and we have the technical ability to develop new products.
We also custom Automotive Stainless Steel Axis Of Cross Tooth Hole for our busienss to business customers.

Certificate Of Honor

News

How Does Kunshan Hong Yongsheng Machine and Inspect Precision Aluminum Screws on CNC Sliding Head Lathes?
23 Oct, 2026
An aluminum screw is easy to overlook, yet in a lightweight device it often decides whether an assembly goes together cleanly. The metal is soft compared with steel, the parts are small, and the thre...
READ MORE
cylindricity: Applications, Selection Criteria, and Practical Guidance
22 Oct, 2026
Cylindricity is one of those GD&T terms that can sound abstract until a shaft will not slide into a bearing, a seal starts to leak, or a rotating assembly develops a vibration that is hard to tra...
READ MORE
How Does Swiss-Type CNC Turning Produce Multi-Stepped Parts Without Visible Tool Marks?
19 Oct, 2026
Why Multi-Stepped Parts Show Tool Marks on Conventional Lathes Buyers who source long, slender shafts with many steps, grooves, and shoulders often run into the same problem: the finished parts show v...
READ MORE
Facing on a Lathe: Setup, Tool Geometry, Feeds and Surface Finish Tips
14 Oct, 2026
Facing is usually the first operation a new machinist learns, and it is often the one that quietly decides whether a part is good or scrap. If you have watched a tool travel straight across the end o...
READ MORE
Straightness vs Flatness: GD&T Differences That Matter on the Shop Floor
09 Oct, 2026
Every week or so, a drawing lands on our desk with two callouts that look almost interchangeable: a short straight line drawn above a shaft, and a small parallelogram drawn above a face. Straightness...
READ MORE